Lights


DS1 Digital Sputnik.jpg

DS1 DIGITAL SPUTNIK 2 LIGHT KIT | $150/DAY

The DS1 is able to output light equivalent to that of a 100W HMI or a 500W tungsten fixture while measuring just 4 x 4", this light ensures portability without sacrificing power. It also uses an RGBW LED module which provides color temperature adjustment from 1500-10,000K as well as full color control, including primary color rendering. This single light system can also be expanded with ease to add more light.

The fixture offers a focused beam angle of 20° along with flicker-free dimming from 0-100% for maximum flexibility. Users will also be able to control this using local controls and an OLED screen. Also, the light can be run off of batteries thanks to a dual V-mount battery plate setup on the PSU, or it can be powered by the included 90-260 VAC adapter. And, it features built-in Wi-Fi and DMX for remote control over the light.

DS3 Digital Sputnik.jpg

DS3 DIGITAL SPUTNIK 3 LIGHT KIT | $150/DAY

The DS3 Digital Sputnik is the perfect LED Lighting for the modern film and video production. The DS3 features 0-100% flicker-free dimming, 1,500-10,000K with +/- green tint, full RGB and primary color rendering. The lights can be controlled remotely via Wi-Fi with a separately available Wi-Fi Control Module or via DMX with a separately available DMX module. Each light draws 140 watts of power and connects to the single DS3 power supply with a long, 30' cable. The included power supply works on 90-260 VAC for international use. 

Quasar Tubes 4ft.jpg

QUASAR 4FT TUBE Q-LED X BULB | $10/DAY EACH

6 Tubes are available.

The Quasar Tubes Q-LED X CrossFade Linear Lamp 4ft is a Variable Color LED replacement for a T12 4' fluorescent lamps. These 50 watt tubes produce 90 lumens per watt! Quasar lamps are dimmable, flicker free and 25,000 hr average life. Best of all the Quasar Tubes are rugged, built with aluminum frame and plastic front diffuser. They can operate as a single tube or ganged together for a large light source. 

Featuring a CRI of 95+ and no green or magenta spike. The X Crossfade lamps have a wheel at the end of the unit to scroll to the desired setting color temperature from Tungsten 2000K to Daylight 6000K. 120 volt AC power is required at just one end of the tube, reducing cabling needs. Each lamp ships with (2) Q Boots and (1) Quasar Grounded Female Tri-Pin to Grounded Male Plug.

Lite Mat 2L S2 Kit.jpg

LITEMAT 2L S2 | $50/DAY

The S2 LiteMat takes lighting to the next level with its thin and ultra lightweight housing, soft color-correct Hybrid (bi-color) output, and convenient mounting options. The new S2 LiteMat is nearly 40% brighter than the original LiteMat, has better color quality, and a widely extended Kelvin range all without an increase in power draw. In addition, overall CRI increased to 95+ with a matching TLCI of more than 95 as well. With all of these tremendous advancements, S2 LiteMat remains compatible with all existing LiteDimmers, LitePower supplies, and cables.

The S2 LiteMat 2L is based on two “tiled” light engine measuring 9.5 in. x 19 in. (240 mm x 480 mm). The head unit features 576 genuine CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener. Mounting is provided with a Kino Flo® compatible, removable gimbal mount. The “soft-through-pixelization” method allows the LiteMat 2L to achieve surprisingly bright light levels while remaining under 1 in. (25 mm) thick and weighing just 3.5 lb (1.6 kg).

Fiilex Light Kit.jpg

FIILEX P360EX 3 LIGHT KIT | $50/DAY

The P360EX is one of Fiilex's most versatile lights, combining power, portability, efficiency and durability all in one package. The P360EX provides a 400W equivalent output and it is both dimmable and color tunable between tungsten and daylight. The LED's high CRI (≥93)makes your colors look natural and vibrant, and an optional DMX Connection Box conveniently incorporates the light in your set-up for centralized control. The P360EX is extremely portable and runs on broadcast batteries as well as AC power, offering greater flexibility when you need to shoot on location and away from power outlets. A durable light with an IP-24 rating, the P360EX works reliably heavy rain, freezing cold, and high humidity and its solid state technology eliminates travel concerns over broken bulbs and fragile parts. Lightweight, powerful, and easily modifiable, the weather-enhanced P360EX gives you an intense light that excels under any conditions.

Westcott 4-Light Kit.jpg

WESTCOTT FLEX LED 4 LIGHT KIT | $100/DAY

These high-end flicker-free lights provide consistent output with pristine 95-98 CRI ratings, water-resistant exteriors, and pliable framework that can be used virtually anywhere. The 1'x1' Flex Daylight LED Mats are perfectly balanced at 5600K to quickly and easily complement the available lighting on your next production. The 10x3" and 1x2' Flex Bi-Color LED Mats are designed with higher-output LEDs so that you don’t have to compromise output for versatility. These mats include a sleek digital dimmer that allows for precise color temperature tuning between 2800K and 6000K.