RT Motion Wireless FF.png

Teradek RT Wireless Lens Control | $100/DAY

  • Mk 3.1 Hand Controller

  • Latitude Receiver

  • Mk 3.1 Motor (x1)

The RTMotion LCS (Lens Control System) gives you solid, reliable, precision wireless control of cinema and still-camera lenses. This super-low weight system features powerful, near-silent motors, FHSS interference immunity, and with a full 16bit digital transmission has an unequaled 1.5Km range and no noticeable latency (2ms).  It's integral protected antennas to help prevent damage and is precision machined from aerospace grade aluminium billet. It features an automatic and manual (soft stop) calibration and a unique calibration algorithm and torque control to protect lenses.

  • Additional Motor | $50/day

  • Thumbwheel | $25/day

Teradek Bolt 3000 Kit.jpg


Transmit uncompressed 1080p video wirelessly over 3000 feet line-of-sight with the Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set. Included in this set are a Teradek Bolt Pro 3000 transmitter and receiver, both equipped with 3G-SDI input/output. The transmitter can pair with and multicast to up to four receivers (additional receivers not included). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.

  • Teradek Bolt 3000 Transmitter

  • Teradek Bolt 3000 Receiver

  • Teradek Bolt 3000 Panel Array

Teradek Bolt 1000 DSMC2 Kit.jpg


With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter/Receiver you can transmit and receive visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The included antennas provide a powerful signal that can travel up to 1000' line-of-sight. Both DSMC2 (back mounted) and Traditional Transmitters are available for a limited time.

  • Teradek Bolt 1000 XT SDI/HDMI Transmitter or DSMC2 Transmitter

  • Teradek Bolt 1000 XT SDI/HDMI Receiver

  • Teradek Bolt 1000 Panel Array

V-Axis Storm 1000+ft w: 2 Receivers.jpg


  • Vaxis Storm 1000ft+ Transmitter

  • Vaxis Storm 1000ft+Receiver

The Vaxis Storm 1000+ft Wireless HDMI/SDI Transmission System utilizes today’s most advanced wireless video transmission technology, which can transmit uncompressed 3G SDI/HDMI HD video signal with no compression and zero delay. The system includes one transmitter and two receivers with OLED side panels for custom configuring. Utilizing a 5.1-5.9GHz frequency band and flexible software, it can be configured to licensed or ISM bands of different global regions and provides 10 workable frequency channels, supporting up to10 sets simultaneously. It can accept a wide range of DC power input, making the system workable with several different battery types and can also sustain ±8 kV ESD (HBM, contact discharge). The industry class metal case and professional heat design provide robust reliability.

  • Additional Receiver | $35/day

Paralynx Arrox-X SDI.jpg


The Paralinx Arrow-X SDI 1:1 Wireless System is a revolutionary HD Video Transmission system offering Realtime Wireless HD with robust long range for your Television, Film, Broadcast, Industrial or UAV/UAS application. The Paralinx Arrow-X SDI transmitter transmits full-HD 1080p/60 with a range of up to 700' (215m) with default antennas (longer range possible with optional antennas) and still maintains an incredible sub 1ms latency glass-to-glass.

Both the Arrow-X HDMI transmitter and receiver feature 2-Pin Lemo power connectors capable of a wide 7-17V unregulated input voltage. The Arrow-X features 3G-SDI input (transmitter) and dual 3G-HDSDI outputs (receiver). Much like the popular Paralinx Tomahawk, the Arrow-X transmits Full-HD video (up to 1080p/60 4:2:2) with less than 1 millisecond delay and is capable of handling up to 4 simultaneous receivers.

Teredek Serv Pro.png


Serv Pro is a hardware streaming device that allows up to 10 iPhones and iPads to monitor a video feed in HD over WiFi. Perfect for script supervisors, hair & makeup, classrooms, and documentary shoots, Serv Pro offers a compelling monitoring alternative to zero delay wireless video systems.

Each Serv Pro feed is streamed at 1080p with just a 2 frame delay. The video stream also includes a stereo audio channel that can be enabled or disabled from the Vuer iOS application. VUER can monitor up to 4 Serv Pro feeds at the same time, all in 1080p and all at the same 2 frame delay. You to use vectorscopes, false color, focus peaking, and more on each Serv Pro feed you’re monitoring. The application is free to use and can be customized to to allow users full or limited access to the toolset.


With a range of 1000ft, the Link is the perfect dual band 2.4 / 5 ghz WiFi router to link all of your on set wifi devices. Designed for use in broadcast and cinema applications, Link offers incredible range, several power options and a chassis suitable for regular abuse in the field and on set.

Link’s quad core processor and significant internal memory ensure high data throughput despite numerous clients utilizing the network at once. Compared to typical consumer access points, Link offers optimized buffering and packet re-transmission, allowing you to maintain a consistent connection even in tough RF environments. With several ¼”-20 mounts, the device can easily be mounted onto light stands, DIT carts, or OB vans.

703 Bolt.jpg


Monitor your camera's feed completely free of wires with the SmallHD 703 Bolt 7" Wireless Monitor. Borrowing the wireless technology from Teradek, the 703 Bolt can receive uncompressed HD wireless signals from Bolt 500, 1000, or 3000 transmitters up to 300' away with no perceptible latency. With this feature, anyone can walk around the set while monitoring a camera feed, perfect for directors and camera assistants. Furthermore, despite the presence of a wireless receiver, the 703 Bolt maintains a slim profile similar to on-camera monitors.

On the rear of the display is the SDI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory.